The need for carpet water damaged restoration can be a big stress. But, if you address it soon enough, you may be able to solve the problem by yourself in just a few steps. This article will show you a few steps you can take to handle the situation. You’ll have to identify the type of water damage on your carpet first and afterward you’ll have to make a strong effort to dry it yourself. This will be an all-day experience, so it would be best to do this on a Saturday or Sunday where you can ensure you have a full 12 hours to yourself. Once the process is complete, you should be able to determine if you will have to go further with the process.First, you must identify the source of the water damage because this will tell you how serious it is. The reason for doing this is so you can know if the water is contaminated or not and at a higher risk for replacement need. For example, leaky pipes and rain water damage is usually clean water and won’t contaminate your carpet. However, if your carpet has gotten wet from a toilet overflowing or a similar source to this it should be discarded and replaced. This is because this type of water is known as “black water” because it has come in contact with groundwater and raw sewage.If the source of the water damage comes from clean water, such as rainwater or leaky pipes, you might still be able to save it yourself. First and foremost, stop any remaining water flow to avoid further damage. If you have to, you should consult a plumber to help you with this task. Next, sanitize the area by scrubbing it with a cleaning solution of bleach and water. This is an example of carpet cleaning water damage areas. After this, use a box cutter to tear around the wet stop and remove the carpet completely. If you are able, it is always best to remove the furniture from the room, but putting it up on blocks is an option as well.Set up powerful fans all around the room and keep them on high speed for a full 12 hours to complete the process of cleaning water damaged carpet. Try to avoid any traffic in the room for the entire 12 hours as this can negatively affect the process. Once the 12 hours is complete, inspect the carpet to see if the wet spot has cleared and dried. If it has, you’re in luck! But if it hasn’t by then, you may be looking at more serious damage that would require replacement of the carpet.Â
